9.5 KiB
Shape–field weak response investigation — 2026-09-18
Prespecified scope
Follow up the large, nearly cancelling shape/field Newton direction for n=1.5, J=0 without a central-density constraint. This study distinguishes within-element physical field transport from surface variation and tests the specific hypothesis that the Q3 displacement/Q4 reference geometry mismatch contributes to weak response. Cancellation by itself is not evidence of a gauge or bad element orders.
The baseline branch is research/shape-field-weak-response-20260918, based on
db854c0f7cdf5137e377273499f0ac5b6053b752. The isolated order variant will be
research/shape-field-displacement-q4-20260918. Preserve original checkout,
immutable executables, source revisions, mesh/input hashes and serial run records.
Observation and controls
The diagnostic prepares a frozen state with fixed normalization, independently verifies its full-J linear defect, saves every value-block Jacobian contribution, and checks restoration of accepted buffers and operator action. Three small raw Taylor trials test the same original operator. Physical observations use independent grid functions and the prepared displacement; no accepted state is modified.
At common quadrature orders 10 and 14, record physical scalar pullback changes,
transport grad(f).v, and Eulerian changes delta f - grad(f).v. Density and
potential gradients are broken/local: facet jumps and RT Piola variations are not
included, so these observations cannot certify a pure relabelling nullspace.
Surface radial parameters are unweighted nodal samples. An independent affine
identity projection checks ambient displacement representation, separately from
the actual r-squared radial extension. Small-span SVDs describe only the sampled
block directions, never the full Jacobian rank.
Baseline frozen cases: the recorded n=1.5 seed and late directions at eta=0.03, and a fresh cold solve at the six-update coupled endpoint. Then a fresh six-update baseline with gravity-Schur inverse, gravity-curvature globalization, restart 160, maximum 200 Krylov iterations, eta=0.03, and a fresh final direction. Match this live run with the Q4 variant from the same analytic seed, including a Q4 seed probe. Cases, builds and expensive audits run serially. A failed linear gate or preparation remains a failure; do not silently relax controls.
Order intervention (conditional on baseline observation)
Only change Displacement::vectorOrder from 3 + uniform increment to
4 + uniform increment on the variant branch; keep uniform increment zero.
The loaded reference geometry remains Q4, density/potential L2 Q2, gravity RT
index 2, and enthalpy H1 Q3. The shared displacement collection means the scalar
surface trace also becomes Q4. This introduces shape modes and changes derived
quadrature orders and cost; it is not a pure interpolation-error intervention.
Document exact source line, date, rationale, DOFs, and compiled quadrature changes.
Use a separate build directory and new analytic seeds: existing coefficient
snapshots cannot be transferred unchanged between orders.
Decision criteria
Compare verified linear accuracy, accepted step lengths, within-variant growth of weak-direction indicators, common physical norms, virials, positivity/EOS metrics and elapsed cost. Across orders, coefficient norms and discrete residuals are not physical error measures. Q10/Q14 agreement diagnoses integration sensitivity, not convergence certification. Virial <=1e-5 remains required but cannot replace internal pointwise checks. Six updates are a bounded mechanistic comparison, not evidence of high-n/high-rotation convergence.
Results
Baseline observations are recorded below. No production default has been changed on this baseline branch.
Reproducible baseline
Evidence root: ../../diagnostics/shape_field_weak_response_2026-09-18 relative
to this checkout. Frozen probes baseline_probes_v1 use source d79db94; the
six-update control q3_live_v1 uses 2c4a5e0. Both include immutable binaries,
mesh/input hashes, commands, clean-source provenance, and independent elapsed
and CPU clocks. All full-J linear gates passed. Independent audits
baseline_probes_audit_v2.json and q3_live_audit_v1.json pass; accepted buffers,
factors and restored actions agree exactly. Q3 curved/tensor/geometry regression:
5 cases, 21,368 assertions passed.
The first checker version omitted the new cache-preservation invariant from its schema. Version 2 requires it. A small finite synthetic matrix reproduced NumPy/Accelerate matmul warnings; direct finite-checked contractions avoid that backend path, without changing tolerances. Raw FEM artifacts remain unchanged. The artifact checker passes 38 tiny algebra/corruption fixtures. The angular analyzer independently checks its degree-8 recurrence, orthogonality, cubic symmetries, rank, and file binding on analytic fixtures.
| Observation | Seed | Old late state (12 updates) | Fresh control (6 updates) | Coupled endpoint (6 updates) |
|---|---|---|---|---|
| Normalized residual | 2.73659e-4 | 1.39670e-5 | 1.49720e-5 | 1.24583e-5 |
| Sampled block-span minimum singular response | 5.80574e-2 | 1.43543e-4 | 8.16558e-4 | 6.94894e-4 |
| Sampled surface radius span / nodal mean | 3.42403e-5 | 1.24122e-2 | 1.09849e-2 | 1.11125e-2 |
The largest sampled singular response remains approximately 22.1–22.6. The SVD uses the six nonzero disjoint value-block pieces of each p, normalized by their coefficient norms. It is not a full-J spectrum or rank test. In particular, comparing the 12-step late state with six-step endpoints does not demonstrate a causal benefit of the coupled correction: the matched six-step control has a slightly stronger minimum response than the coupled endpoint.
Late q14 Eulerian/pullback change norm ratios are density 0.05769, enthalpy 0.18870, potential 0.01288, versus seed 0.3243, 0.3080, 0.1993. This is substantial transport compensation but not physically invisible motion. Broken DG gradients omit jumps. The maximum q10/q14 relative difference in the three original cases' Eulerian squared integrals is 1.69e-5, an integration sensitivity observation.
The radius observations expose a validation gap: the old late state has nodal radii 0.997674–1.010093, while its q18 P(h)-based virial error is 4.06909e-6. The fresh six-step control has q18 virial error 4.22590e-6 and reproduces the old six-step residual trajectory. Neither is converged or physically certified; negative density samples remain. Virial success can coexist with appreciable nonrotating surface asphericity at these unfinished states.
q3_surface_modes_v1.json contains unweighted fits, not surface-integral power.
The 12-step late direction is 99.9995107% cubic-invariant in sampled squared
norm, but degree <=8 spherical harmonics leave 0.893679 of its nodal norm.
Degree <=2 leaves 0.981646. Thus this is predominantly finer cubic-symmetric
structure, not simple expansion, translation, or quadrupolar deformation.
This is consistent with mesh/discretization coupling, without proving its cause.
The affine control on the actual stellar mesh gives Q3 relative value error 9.01277e-5 and gradient error 1.23472e-3. This warrants the isolated Q4 comparison, but adding surface modes could also worsen weak response.
Structural interpretation and a rejected shortcut
At J=0, bulk Bernoulli rows are unweighted moments. Their direct shape derivative
at fixed reference-field coefficients is integral(q * B * div(v)); the EOS
shape column similarly contains its local closure imbalance. Thus pointwise
near-equilibrium shape information increasingly relies on gravity and mechanical
coupling. Small projected residuals alone do not prove small pointwise imbalance.
Current shape rows are the prescribed lift's transpose applied to volume force.
For regular surface hs, densitys^n and pressure~s^(n+1), weakening near-surface
coupling as n increases is plausible. DG jumps and the independent RT field
prevent concluding exact discrete redundancy from the continuum identities.
Relevant assembly: libmeanfield/impl/operators/prepared_hydrostatic_equilibrium.cpp
(lines 864–911, 1354–1397), operators/kernels/barotropic_closure_kernels.cpp
(line 655), and operators/prepared_stellar_equilibrium.cpp (lines 806–811).
A naive replacement of mechanical shape rows by surface Bernoulli moments is rank deficient at the desired pointwise B=0, J=0 root with the current trace spaces. The actual closed stellar surface has 96 quads, 192 edges, 98 vertices. Continuous surface Qp has 96pp+2 degrees of freedom; broken Q(p-1) potential traces supply only 96pp. Q3 surface therefore has 866 rows versus 864 DG Q2 stellar trace coefficients, after eliminating enforced h=0 trace variations. C adds no independent trace dimension; the direct shape measure term vanishes with B. Surface-only Q4 widens this hypothetical deficit to 1538-864=674. This concerns that proposed replacement, not a proven deficiency of the current mechanical Jacobian. Any boundary formulation requires a compatible trace/test space and explicit rank/stability analysis.
An invertible transport coordinate/preconditioner change preserves roots and may improve linear algebra, but cannot itself change the exact Newton direction or remove a true weak physical response. Shape representation, step control, and operator formulation remain distinct hypotheses.
Q4 intervention
Pending on its isolated branch. Its rationale is to remove measured ambient affine representation error and test the effect on the observed weak direction; the additional surface modes and quadrature changes are explicit confounders.